background image

E

N

G

LI

S

H

10

RX8001 User Guide

5

Select the Extender that you want to configure and click on the 

Configure

button.

The Configuration Tool opens in the browser.

6

Select

Firmware Update

in the left navigation pane.

The Firmware Update page opens.

7

Follow the onscreen instructions.

When you are asked to browse to the update file, you need to select the ZIP file you
downloaded earlier from the website.

Tip

When your Extender is 

not recognized by the Extender Discovery

tool, update the Extender

with the crossed Ethernet cable, as described on page 9.

Specifications

The specifications and design of this product are subject to change without notice.

General

Dark grey ABS housing with poly carbonate front plate
802.11 b/g compliant RF technology
4 LED indications for Power, WiFi, Network and Busy 
Up to 16 extenders and 16 control panels in a system (for all modes) 
4 addressable outputs for IR emitters
Ethernet RJ45 connection
Rotatable RF antenna
Positioning: freestanding or mounted in any position

Modes

Stand-alone (wireless)

: Similar to WiFi ad-hoc mode; no access point and

router required

Network (wireless)

: Similar to WiFi infrastructure mode; used in a system with

a router and access point

Network (wired via Ethernet)

: used in a system with a router and access point

Dimensions

3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm)

Operating temperature

32°F to 122°F (0°C to 50°C)

Infrared (IR)

IR frequency range: 25kHz-1MHz (including DC/flash codes)
IR power out: 2 levels

Radio Frequency (RF)

802.11g at 2.4 GHz with additional proprietary protocol

Dual IR emitters

Number of IR emitters: up to 4 (2x2), emitters wired in series
0.13 inch (3.5 mm) mono mini-jack
Cable length: 9 ft (2.7 meters)

Mono mini-jack cables

0.13 inch (3.5 mm) mono mini-jack
Cable length: 5 ft (1.5 meters)

Power adapter

100V-240 VAC / 50-60 Hz Power adapter (5 VDC/2A output, UL-CE approved)

Accessories

Warranty certificate (For USA/Canada only)

Wireless Extender User Guide

© Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki-
SHI, Kanagawa, 210-8569, Japan.

Remarks:

All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.
Marantz Brand Company – A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors
in this manual or for damages directly or indirectly resulting from the use of the Wireless Extender.
The information in this User Guide may be subject to change without prior notice. All brand or product names are
trademarks or registered trademarks of their respective companies or organizations.

Summary of Contents for RX8001





















Reviews: