User Guide
3
1
Attach the emitter around the receiving eyes of your devices. It is suggested
to adjust the location to find the most sencitive area before fix the emitter.
2 Plug the dual IR emitters into the RF Extender.
Note To avoid interference, the wires of the
emitters should be kept away from the
RF Extender as far as possible.
Connecting the Power Adapter
When connecting the power adapter it is recommended
that you plug the adapter into the RF Extender before
you plug it into the socket. When connected you will
see a red LED on the RF Extender.
should be kept away from the
RF Extender as far as possible.
RX-77 07-25-2001 Page 3 of 6
Emitter
How to use the emitters
Note To avoid interference, the adapter cable
The IR emitters can control devices the IR blaster cannot reach, for instance when
there is limited space in a small closet, it can be placed in a location as to where
the infrared receiver, can receive the signal.
Using the Dual IR Emitters
You can use the dual IR emitters as an
alternative
for the IR blaster.
Note
The IR emitters can also be used in
combination
with the IR blaster of the
RF Extender. Both send out IR signals simultaneously. This allows you to operate
several devices using both the IR blaster and the IR emitters.
Installation
