![background image](http://html1.mh-extra.com/html/marantz/hd-amp1-u1b-k1b-fn/hd-amp1-u1b-k1b-fn_service-manual_1724514021.webp)
4. Factory Initialization Mode
Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the PCB.
4.1. Operations
·While holding down buttons the "
X
" and "
SETUP
" buttons simultaneously, insert the AC plug to turn the power on.
·Next, press the "
SETUP
" button 3 times.
(a)Mode display
FLD
L1
F a c t o r y
L2
R e s e t
·This unit starts to initialize if there are no operations for more than 2 seconds after the display above.
(b)Display during initialization
FLD
L1
L2
R e s e t . . .
·After initialization, this unit exits service mode and returns to normal operation.
5. Auto Standby test mode
5.1. Starting up
While holding down buttons the "
X
" and "
SETUP
" buttons simultaneously, insert the AC plug to turn the power on.
·Press the "
SETUP
" button to switch to the Display/LED check mode.
·Press and hold the "
SETUP
" button for more than 1 second.
(a)Mode display
FLD
L1
A u t o S t b y
L2
T e s t
5.2. Actions
·The auto standby time is 4 minutes.
·Remove the AC plug to exit this mode.
21