23
Wi-Fi Protected Setup (WPS)
Settings (PIN code method)
Sets the wireless connection using WPS (PIN code method).
Before turning this unit on, make sure that an LAN cable is not
connected to this unit.
When a LAN cable is connected, set the power to standby and
disconnect the LAN cable.
1
Press
FUNCTION
repeatedly until
“Settings” is displayed.
Settings
ELEC
TRONIC GY
RO TOUCH
ENTER
FUNC
TION
PLA
Y/PAUSE
2
Turn
GYRO
to select “WPS(PIN)”,
then press
ENTER
.
ELEC
TRONIC GY
RO TOUCH
ENTER
FUNC
TION
PLA
Y/PAUSE
WPS(PIN)
•
“Searching” is displayed, and the access point you have set is
displayed.
3
Turn
GYRO
to select the access point whose PIN code
you want to display, and press
ENTER
.
The PIN code number is displayed.
4
Set this PIN code to the register.
•
For how to register the PIN code, see the owner’s manual of your
router with access point.
•
When connection is established with access point, “Connected!”
is displayed.
n
Exiting the menu to return to the normal mode
Press
FUNCTION
repeatedly until “Source” is displayed.
•
The unit exits the setting mode and the normal display returns.
To return to the previous item, turn
GYRO
to select “Back”, then press
ENTER
.
Auto-Standby
With the Auto Standby set to ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
•
The default setting is “Off”.
1
Press
FUNCTION
repeatedly until
“Settings” is displayed.
Settings
ELEC
TRONIC GY
RO TOUCH
ENTER
FUNC
TION
PLA
Y/PAUSE
2
Turn
GYRO
to select “Auto-
Standby”, then press
ENTER
.
ELEC
TRONIC GY
RO TOUCH
ENTER
FUNC
TION
PLA
Y/PAUSE
Auto-Standby(Off)
3
Turn
GYRO
to select the item you want to check, then
press
ENTER
.
Auto-Satandby Off
The unit does not go into standby automatically.
Auto-Satandby On
The unit goes into standby after 30 minutes.
You can also switch the power to standby by pressing
ON/STANDBY
on the main unit.
NOTE
In the following situations, the Auto standby function does not operate.
•
When an iPod, iPhone or iPad is connected to the Dock connector
on this unit.
•
When the input source is “LINE IN”.
•
When the input source being played is “Internet Radio”or “Music
Server”.
n
Exiting the menu to return to the normal mode
Press
FUNCTION
repeatedly until “Source” is displayed.
•
The unit exits the setting mode and the normal display returns.
To return to the previous item, turn
GYRO
to select “Back”, then press
ENTER
.
Network Control
Set the network function on or off during standby.
•
The default setting is “On”.
1
Press
FUNCTION
repeatedly until
“Settings” is displayed.
Settings
ELEC
TRONIC GY
RO TOUCH
ENTER
FUNC
TION
PLA
Y/PAUSE
2
Turn
GYRO
to select “Network
Control”, then press
ENTER
.
ELEC
TRONIC GY
RO TOUCH
ENTER
FUNC
TION
PLA
Y/PAUSE
Network Control(On)
Network Always On
Network is on during standby. Main unit is
operable with a network compatible controller.
Network Off in
Standby
Suspends the network function during standby.
NOTE
When “Network Control” is set to “Network Always On”, it consumes
more standby power.
n
Exiting the menu to return to the normal mode
Press
FUNCTION
repeatedly until “Source” is displayed.
•
The unit exits the setting mode and the normal display returns.
To return to the previous item, turn
GYRO
to select “Back”, then press
ENTER
.
Pr
epar
ation
Oper
ation
Inf
or
mation
Oper
ation
