Marantz AV8802 Owner'S Manual Download

Page: 290 / 371

Operations cannot be performed through the remote control unit

Symptom

Cause / Solution

Page

Operations cannot be

performed through the

remote control unit.

Batteries are worn out. Replace with new batteries.

Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within

30°.

Remove any obstacle between this unit and the remote control unit.

－

Insert the batteries in the proper direction, checking the

and

marks.

The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb

light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.

－

The operation target zone does not correspond to the zone setting specified on the remote control unit.

Press ZONE SELECT to select the zone to operate.

186

The remote control unit operating mode is used to operate other devices. Press AVP to set the operating

mode to AVP.

276

When using a 3D video device, the remote control unit of this unit may not function due to effects of

infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the

direction of units with the 3D communications function and their distance to ensure they do not affect

operations from the remote control unit of this unit.

－

Display on this unit shows nothing

Symptom

Cause / Solution

Page

Display is off.

Set “Dimmer” on the menu to something other than “Off”.

266

When the sound mode is set to “Pure Direct”, the display is off.

151

Contents

Connections

Playback

Settings

Tips

Appendix

290

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV8802



















































































































































































































































































































































































Search results

Summary of Contents for AV8802

Reviews:

Related manuals for AV8802

Brands by name

Popular brands

Marantz AV8802, Owner'S Manual

Search results

Summary of Contents for AV8802

Reviews:

Related manuals for AV8802

Brands by name

Popular brands