![background image](http://html1.mh-extra.com/html/labgear/lma113r/lma113r_installation-manual_3189780001.webp)
Introduction
The name Labgear has been associated
with quality signal distribution since 1932
and the current range of amplifiers
continues to uphold that tradition.
All LMA masthead amps can carry analogue and
digital TV, Freeview, DVB-T and DVB-T2 HD TV signals and have:
• Improved gain flatness delivering a better balance across
the performance range
• Lower noise figure for optimised signal quality
• Greater signal handling capacity to cope with more channels
• Better impedance matching and therefore improved signal
transfer from amp to cable
and now
• Class 3 filtering to provide a typical 45dB protection from
interference from 4G LTE800 transmissions
All LMA amplifiers are compliant with the Radio Equipment
Directive 2014/53/EU and meet harmonised standard
EN 303 354 for product Type D, Class 3.
Labgear masthead amps are packed with features to
make installation easier, simplify fault diagnosis and deliver
a durable, quality solution, including:
• A sturdy metal mast clamp instead of a plastic cable tie
• LED power indication which assists fault diagnosis
• Tilt-out module for easier cable connection
• F-type connectors for better matching and security
• Solid housing with weatherproof seal
• Every masthead is supplied with a FREE metal f-type spanner
Low Noise Masthead Amplifiers
1
COMPLIANT
LMA113R
13dB UHF Pre-Amp
LMA125VR
12-25dB Variable Gain UHF Amp
KIT125VR
LM PSUFC Power Supply
LMA209R
1-in, 2-out UHF Amp
LMA415VR
2-in, 4-out 0-15dB Variable Gain
VHF/UHF Amp
KIT415VR
LM PSUFC Power Supply
Locking
Catch
Weatherproof
Seal
Mast Clamp
Tilt
Power On LED