Marantz AV8802 Owner'S Manual Download

Page: 301 / 371

The Internet radio cannot be played back

Symptom

Cause / Solution

Page

A list of broadcasting

stations is not displayed.

The LAN cable is not properly connected, or the network is disconnected. Check the connection status.

Perform the network diagnostic mode.

－

Internet Radio cannot be

played.

The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can

be played back in this unit are MP3, WMA and AAC.

315

The firewall function is enabled on the router. Check the firewall setting.

－

The IP address is not properly set.

258

Check the power of the router is on.

－

To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the

DHCP setting to “On” on this unit.

258

To obtain the IP address manually, set the IP address and proxy on this unit.

258

Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a

while and select the same radio station, or select another radio station.

113

Cannot connect to favorite

radio stations.

Radio station is not currently in service. Register radio stations in service.

－

For some radio stations,

“Connection down” is

displayed and station

cannot be connected to.

The selected radio station is not in service. Select a radio station in service.

－

Contents

Connections

Playback

Settings

Tips

Appendix

301

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV8802



















































































































































































































































































































































































Search results

Summary of Contents for AV8802

Reviews:

Related manuals for AV8802

Brands by name

Popular brands

Marantz AV8802, Owner'S Manual

Search results

Summary of Contents for AV8802

Reviews:

Related manuals for AV8802

Brands by name

Popular brands