Marantz AV7702 Owner'S Manual Download

Page: 309 / 343

Audio

ALAC (Apple Lossless Audio Codec)

This is a codec for lossless audio compression method developed by

Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data

compressed to approximately 60 – 70 % can be decompressed to exactly

the same original data.

FLAC (Free Lossless Audio Codec)

FLAC stands for Free lossless Audio Codec, and is a lossless free audio

file format. Lossless means that the audio is compressed without any loss

in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,

2009 Josh Coalson
Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

Neither the name of the Xiph.org Foundation nor the names of its

contributors may be used to endorse or promote products derived from

this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

LFE

This is an abbreviation of Low Frequency Effect, which is an output

channel that emphasizes low frequency effect sound. Surround audio is

intensified by outputting 20 Hz to 120 Hz deep bass to the system

subwoofer(s).

MP3 (MPEG Audio Layer-3)

This is an internationally standardized audio data compression scheme,

using the “MPEG-1” video compression standard. It compresses the data

volume to about one eleventh its original size while maintaining sound

quality equivalent to a music CD.

Contents

Connections

Playback

Settings

Tips

Appendix

309

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AV7702
























































































































































































































































































































































Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands

Marantz AV7702, Owner'S Manual

Search results

Summary of Contents for AV7702

Reviews:

Related manuals for AV7702

Brands by name

Popular brands