And we can chose a different setting within the Filt2 page:
The filter's Frequency can be set already within these editing pages using the PM2 encoder, but
here is for Frequency “fine tuning” being the Frequency increment/decrement done by 1Hz steps.
For a quick High Cut Frequency setting, need to press the ENTER Button for accessing the High
Cut Frequency Fast Setting Page.
“High Cut Frequency”: the selectable frequencies range is from 20Hz to 20kHz.
Here, the NAV/PM1” encoder will increment/decrement the Frequency value by step of one
thousand Hz, the PM2 by steps of one hundred Hz and the PM3 by steps of one Hz.
Note1
: once the desired options have been selected using the 2 encoders, they are automatically
saved as current and stored in the DPA240P system status once leaving the page.
Note2
: to exit this page, push the “ESC” button.
EQ Byp page – from this sub-menu it is possible to Bypass or to make active the 5 Bands
Equalizer placed on the Output Signal Path.
When Bypassed the 5 Bands Equalizer, its current setting will not be lost.
EQ: [x] sub-menu – from this sub-menu it is possible to set the Output Channels five available
Multi-Type Filters.
Anyone of the 5 filters of the Eq can be selected choosing from the list of filter types shown
already at the “Input Path” section [Peaking_Eq, Hi-Shelv_Q, Lo-Shelv_Q, All Pass_2]
More, the DPA240P Is giving the possibility to “Bypass” any single filter of the 7 available in the
Equalizer section; Once in the editing page of the single filter, a “Byp” field is available for making
the single filter active or not
Pushing the Enter Button, the above window will allow the access to the “Byp” and “Type” fields.
Using the PM2 encoder, the selected Filter can be activated or bypassed.
The DPA240P allows the user to select anyone of the filter's type listed above and assign them
independently using the 5 available filters.
Out
-
1
Low HPF
->Flit2 F=400Hz Q=1.5
Out
-
1
Low HPF
->Edit Freq=400Hz
Out
-
1
Name Byp
->Edit Bypass = Off
Out
-
1
Name EQ-X
Byp= Off Type=Peaking Eq
Out
-
1
Name EQ-X
->Byp= Off Type=Peaking Eq
2 In - 4 Out Speaker Management System
