Marani Pro Audio PDA500PF, Quick User Manual

Page: 19 / 59

OUTPUT WINDOW
All the processes available on the Output Paths can be edited within the Output Windows.
Eq Flat and Bypass Controls : the EQ Flat control is allowing to flat in one shot the 8 bands Parametric
Eq. The Bypass control, instead, is allowing to temporarily Bypass the Eq, without resetting the current
setting.
EQ Filters : within this frame, the all 8 filters of the PEQ can be defined in terms of type, gain, Freq, Q
- Filters type : on top of the Slider and the box showing the gain level, there is a button that once
pressed is opening a wide list of filters type which can be selected, for each filter of the parametric Eq.
The available filters are Bell (constant Q), Hi/Low Shelving Q (Symmetrical with variable Q), Lp/Hp Q
(12dB/Oct second order, variable Q) and Notch .
- Gain : the filter types which can gain, have the gain controlled by a slider ranging from -15dBu up to
+15dBu.
- Freq : here can be inserted the Center, Cutting Frequency of the selected filter, ranging from 20Hz up
to 20kHz.
- Q : there where usable, the Q can be set with a range depending from the selected filter.
- Byp: any filter of the 8 of the Parametric Eq, can be singularly bypassed, so to have the possibility to
a quick A/B comparison between the signal when active or not the filter currently in editing phase.