On the base of the note above, Load/Save. Store and Recall icons allow the following...
Load
: Load a previously saved Input Configuration from a defined Pc directory. The configuration
loaded will be the one edited with its parameters set on the input editing windows. The configuration
loaded is containing only the Input parameters
Save
: Save the current Input Configuration (the all parameters set within the Input Window) into a
defined Pc directory. The saved configuration is containing the Input parameters.
Store
: Save the current Input Configuration (the all parameters set within the Input Editing Window)
into one of 8 available locations within the
PDA500PF
. The saved configuration is containing the ALL
parameters set in the Input Editing Window and can be recalled also from the unit's front panel.
Recall
: Load a previously saved Input Configuration from one of 8 available locations within the
PDA500PF
. The configuration loaded will be the one edited with its parameters set on the Input
editing window.
The stored Preset within the unit are re-callable on the PDA500PF, by the external available 8
positions absolute encoder.
Encoder Position
: this frame is indicating the current position of the Absolute Encoder located on the
PDA500PF Plate.
Overflow Process
: this Led turn ON if an Overflow is occurring within the DSP processes and the
Overflow Clip Limiter become therefore Active. [see IMPRTANT NOTE later]
Temperature
: in this frame is displayed the current Temperature of the Power Stages. If the
temperature is exceeding the 80Deg Celsius, the the DSP set Outputs (feeding the power Stages) are
MUTED.
V
: button allowing to access the GAINS and SYNOPTIC image Main Editing Page
I
: buttons allowing to access the INPUT CHANNEL Editing Pages
L
/
H
: buttons allowing to access the OUTPUT CHANNELS Editing Pages
i
: info button, giving information about the Firmware and Pc Sw version.
Summary of Contents for PDA500PF
Page 6: ...Processes Block Scheme...
