manualshive.com logo in svg

Maquet Medap, Operating Instructions Manual, Page: 5 / 36

Share
Download
Maquet Medap Operating Instructions Manual Download Page 5

Introduction

Foreword

GA 5750.4172 EN 14

5

1

1 

Introduction

1.1 

Foreword

Your facility has selected the leading-edge medical technology made by ATMOS. We sincerely 

appreciate the trust you have placed in us.

1.2 

Environmental protection

1.2.1 

Packing

The packing is made of materials compatible with the environment. ATMOS will dispose of the 

packing materials upon request.

1.2.2 

ATMOS products

ATMOS will take back used products or those which are no longer in service.
Please contact your ATMOS representative for more detailed information.

1.3 

Disposal

WARNING!

Disposal!
The product is used in the treatment of patients. The product or some of its 

components may be contaminated after use.
Clean and disinfect the product before disposal.

1.4 

How to use these operating instructions

1.4.1 

General

These operating instructions are provided to familiarise you with the features of this ATMOS 

product. They are subdivided into several chapters.

Please note:

•  Please read these operating instructions carefully and completely before using the product for 

the first time.

•  Always proceed in accordance with the information contained herein.
•  Store these operating instructions in a location near the product.

1.4.2 

Abbreviations

EN

European standard

EU

European Economic Community

VDE

Verband der Elektrotechnik Elektronik Informationstechnik (Association for 

Electrical, Electronic & Information Technology)

1.4.3 

Symbols

1.4.3.1 

Cross-references

References to other pages in these operating instructions are identified with a double arrow 

symbol „

“.

Summary of Contents for Medap





































Reviews:

No comments