manualshive.com logo in svg

Maquet Medap, Operating Instructions Manual, Page: 19 / 36

Share
Download
Maquet Medap Operating Instructions Manual Download Page 19

Operation

Regular operation

GA 5750.4172 EN 14

19

4

4 

Operation

The FINA fine regulating valve is used to describe the operation of the unit.

WARNING!

Risk of injury!
The product may only be used in combination with a regulator unit.

NOTE

A fastening chain is attached to the hand-held nebulizer to suspend the hand-held 

nebulizer to a rail bracket.

4.1 

Regular operation

2

1

Fig. 8: Regular operation

To be performed by technical staff:

 

Take hand-held nebulizer from the rail 

bracket (1) and hand it to the patient.

 

Open regulating unit (2) on the fine 

regulating valve.

2

1

Fig. 9: Regular operation

To be performed by patient:

 

Place inhalation mask (1) to mouth and 

nose with slight pressure.

 

Turn knurled head screw upward.

 

Hand-held nebulizer is set to continuous 

nebulisation.

 

Press knurled head screw (2) down.

 

Nebulisation is interrupted.

 

Inhalation may be adjusted to the 

respiratory rhythm by pressing down and 

releasing the knurled head screw.

Summary of Contents for Medap





































Reviews:

No comments