1133.12B1/B3/F1/F3
GA113312EN02
15
2.3.2 Charging station
Recharging the IR remote control:
•
Connect the mobile charging station to the mains.
The green LED in the charging station indicates whether
the required supply voltage is available or not.
•
Place the IR remote control in the charging station
as follows:
– Keypad visible, in the position for normal use,
i.e. the 0-position button (x) is located at the
bottom right
– the base of the hand control is in contact with
the lower limit stop of the holder.
Note:
The capacity of the rechargeable battery for the IR
remote control is sufficient to ensure several day’s
use of the operating table. Nevertheless, we recom-
mend that you insert the hand control into the holder
of the charging station so that the battery is re-
charged overnight.
2.4 Control via IR wall control panel
The desired adjustment functions of the operating table
can be controlled by means of the function buttons (1)
at the wall control panel or the separate IR hand control
(2).
Note:
The IR wall control panel can be mounted to the
wall at a later date.
For further information please refer to the operating
instructions GA115095GBxx.
III. General description
Fig.III-9:
Charging station
Fig.III-11: IR wall control panel
Fig.III-10: Charging station