1.Power Key
2.Reset
3.AVIN Connect with outside AVIN wireless receiver module
4.MINI USB Port
①
Exchange the data with PC by MINI USB cable
②
Charge the GPS device by connecting AC adaptor or car charger.
③
Connect TMC for receiving module
5.Power Indicator The light is red during charging, it will turn green when the battery is fully charged.
6.Earphone Jack
7.SD card slot
8.Speaker
9.Touch-pen
10.Bracket block slot
11.Display Screen
12.Mic Hands-free input the voice
Power on /off /sleep
When the device crashes, halts or works in an abnormal manner,
press this key to reset the system
①
⑨
④
⑦
③
⑥
⑩
②
⑧
⑩
2.3 Illustration
In-vehicle/portable GPS navigation has two ways of power supply: battery supply and
power supply.
When the device doesn't connect with the adaptor, it is supplied by the lithium battery.
The icon at the top right corner on the main interface of system indicates the
current remaining power.
When the device connects with the adaptor, it is supplied by the outer power.
Tips
【
Tips
】
Under normal condition(volume and backlight at 50
％
),
it can last about 3~4 hours after the battery is fully charged.
Some functions need to consume a lot of battery energy, such as
audio/Movie playing, high backlight and Bluetooth, which may
reduce the using time.
【
Caution
】
Please insert the car charger after the car starts in
order to avoid any damage to the device while starting up.
Caution
Tips
【
Tips
】
When charging, the indicator is red, and the power icon at the
top right corner on the main interface will become into the charging
icon. After fully charged, the indicator turns green, and the power icon
at the top right corner on the main interface will be full.
3.Basic Operation
3.1 Battery and Charger
3.1.1 Power Supply
3.1.2 AC adaptor
It should use AC adaptor to charge up when the device
.
1. C
.
2. Connect one end of adaptor with the device and the other with the AC power jack.
firstly used
onnect one end of adaptor with the device
3.1.3 Car charger
1.
2. Connect the other end with the cigarette lighter of the car in order to supply power
and charge up the device at the same time.
Connect one end of the car charger with power input jack of device.
-5-
-6-
Summary of Contents for Vx240
Page 1: ......
