SETTING UP AND TESTING PRODUCTS
HOW YOUR ALARM WORKS
This alarm is activated by sensing the interior
light coming on, or by sensing a movement of
the vehicle.
NB: If you regularly park on a road which
carries heavy traffic then it is recommended
that you set the shock sensing to a less
sensitive setting to ensure that you do not get a
lot of false alarms.
TESTING YOUR ALARM
A. Current Sensing
The alarm is activated by your interior light
going on when the door is opened. Therefore
your interior light system must work.
To test your alarm, close all the doors, boot and
bonnet. Depress the arm button on the remote
control. You will hear the alarm chirp once, and
the LED will start to flash. Your alarm is now
armed.
After 5 minutes, open one of the doors which
operates the interior light. Your alarm will be
triggered and the siren will sound.
To switch off, press the disarm button. If you do
not press the disarm button, the siren will sound
for approximately 30 seconds and then switch
off. The alarm will then
reset itself so that is armed.
When the alarm is disarmed, close the door
and then re-activate the alarm. Try all the doors
that operate the interior light to make sure that
they all trigger the alarm.
In the normal course of using your alarm, it will
chirp once when you arm the alarm, and twice
when it is disarmed.
OPEN
DOOR
INTERIOR
LIGHT
NOW
GOES
ON
ALARM
SOUNDS
