manualshive.com logo in svg

Manx Destubt V2, User Manual

Share
Download
Manx Destubt V2 User Manual Download Page 18

The Destiny v2 control panel provides all you need to effectively control the synthesizer.  Here, you will find
a noise source selector, test tone facility, duophony mode selector facilities to load and save patches,  
a second LFO and more.  Please note that apart from the patch memory menus, all controls in this section save 
with the patch, including Master-Tune and Test-Tone controls.

 

( 5 ) PORTAMENTO

( 6 ) PITCH BEND RANGE

The Destiny v2 features portamento.

Controls pitch bend range, from 0 to 1 octave each way. 

17 Control Panel 

(1) Noise Source Selector: selects between white and pink noise, as described in 
the mixer section of the user guide.
 
(2) Test Tone:  Use this to check that the Destiny is correctly set up within your 
host software. If pressing keys does not yield a sound but the Test Tone can be 
heard, then the chances are that the Destiny’s midi input is not configured 
correctly. The test tone emits a pitch of middle C ʹ. You can thus check that the 
Destiny’s tuning is correct.
 
(3) Monophonic / Duophonic selector ʹ switches between monophonic (1 voice, 2 
VCOs) and duo-phonic operation (2 voices, 1 VCO each - reverts to 2 VCOs if only 
one note is being played).
 
(4) Legato/re-trigger ʹ when set to re-trigger, this re-triggers the envelopes every 
time a new key is depressed, even if the last key is still being held down.  This is 
not applicable when in duo-phonic mode. 
 
Note that vintage analog synthesizers often did not have this option; it can be of 
great help , but can lead to audible ‘clicking’ when very extreme filtering is 
applied.
 
 

( 7 ) Transpose

Use this to set the octave range of the Destiny v2 (finer pitch adjustments must be carried out using the 

oscillator pitch sliders.  +/- 2 Octaves. 

Vibrato LFO  (LFO 2)

This is designed to provide vibrato (pitch oscillation ) while freeing up the Destiny’s main LFO for other 

purposes. It can only produce a sine wave. 

 

The speed is determined by slider (8) while the intensity is determined by 

Modulation Wheel 

position, 

factored by the sensitivity knob (9).

1

2

3

4

5

6

7

9

8

Summary of Contents for Destubt V2





























Reviews:

No comments

Brands by name

Popular brands

Load more brands