Manutan A047444, User Manual, Page: 40 / 162

Failure to obey the instructions and safety rules in this manual may result in death or
serious injury.
1.1 Do Not Operate Unless:
1) You learn and practice the principles of safe machine operation contained in
this operating manual.
• Avoid hazardous situations.
• Always perform a pre-operation inspection.
• Always perform the function tests prior to use.
• Inspect the workplace.
• Only use the machine as a material lift.
2) You read, understand and obey:
• Manufacturer’s instructions and safety rules
• Employee’s safety rules and worksite regulations
• Applicable governmental regulations
1.2 To Avoid Hazardous Situations:
1) Fall Hazards
• Do not use as a personnel lifting platform or step.
• Do not load unstable or loosely stacked loads.
2) Tip-over Hazards
• Do not overload the machine.
• Do not unbalance the load, centre the load in the middle of the platfrom.
• The dimension of load can not exceed the size of the table.
• Prior to use, check the work area for drop-offs, holes, bumps, debris,
unstable surfaces or other possible hazardous conditions.
• Do not move the machine with a raised load, except for minor
positioning.
• Do not subject the machine to horizontal force by raising or lowering a
fixed or overhanging load.
Before operating this machine.
Only trained and authorized personnel should be permitted to operate this lift table.
Please replace Part No.2113 with hole prior to use.
3
1. Safety Rules
WARNING