Mantracourt Electronics Limited
PSDS User Manual
34
Export Tab
–
Clone Export
Clone Export is an advanced form of export that offers the ability to export data that may be locked and
protected by a password and also allows passwords to be encrypted into the exported file and get applied to the
freshly cloned device when imported.
When creating the Clone Export file an optional password may be supplied to automatically apply protection to
the cloned device when imported.
It is important that these passwords are not forgotten. Resetting of a forgotten password
will require proof of access rights and may require a return to supplier and may incur
additional cost.
If the connected device has a password locked calibration or configuration section then the same passwords
must
be entered to proceed.
Summary: To successfully create a Clone Export the connected device must be unlocked or the passwords known
for those locked sections. If a section is currently unlocked, then a password may be supplied at this point to be
automatically applied to the cloned device later.
Item
Description
Back
button
Go back to standard export page.
Clone Export
button
Export Clone configuration to a file on the PC
. This will open a file dialog box to allow you to
specify where the export will be saved.
