7” DIGITAL LCD
– TV 701
24
Preset
Position
8
Remember
ON
Band
V-L
Swap
8
Fine
Search
Auto Search
Select
Adjust
CH/CH Select VOL +/VOL - : Adjust
Press VOL- or VOL+ to choose ON under the item Re-
member, it then displays this channel upon changing pro-
gram. If close CH -/CH +, it doesn’t display the Channel
Number.
Press CH- or CH+ to choose the item Auto Search:
Preset
Position
8
Remember
ON
Band
V-L
Swap
8
Fine
Search
Auto Search
Select
Adjust
CH/CH Select VOL +/VOL - : Adjust
Press VOL- or VOL+ to start Auto Search, and put
into automatic Remember and storage upon completion
of Auto Search. Choose channel in order of V-L =>V-H
=>UHF, and return to Program No. 0 upon completion.
Notes:
1. Auto Search Start from Program No. 0.
2. When receive signal under Search, the Program
Indication Bar should turn from red into green, which
means the optimum position for signal storage. If
channel under weak signal is received, the channel
storage system will automatically identify it as no
signal.
In order to receive
clearer picture
Adjust the length, angle and direction of the telescopic
antenna to obtain optimum picture. Draw back the antenna
from the butt end after usage.
In case the signal intensity is too weak, the picture will
remain inferior whatever you adjust the antenna, and cau-
se loud noise wave, shaking picture and inferior sound,
etc., which is not TV fault. If the picture remains inferior
when using telescopic antenna, please try to use the exter-
nal antenna or CATV.
Before you request for repair
Phenomena below are not necessary mean broken TV
set. Please check off per following methods before you re-
quest for repair.
No picture, no sound
Improper connection with AC adapter or Automobile
adapter. Use of unauthorized power supply. Power Switch
is on OFF position.
No picture
Whether the correct Channel is selected. Automatically
set up the Receiving Channel again. Any new place is sub-
ject to re-setup of channels.
No sound
Whether the sound is turned to end or under an incorrect
Sound System. Whether earphone is plugged in. Muffle
actions under too weak signal.
Dark picture
Whether Bright and Contrast is adjusted correctly; May-
be too weak signal at the receiving place.
Summary of Contents for TV701
Page 26: ...7 DIGITAL LCD TV 701 26 Note ...