12” LCD TV
– 1202
19
Supporting display modes
Recommended Mode: 1024 768@60Hz
Note:
This machine is controlled by micro computer. In
case of nay function failure, please firstly disconnect po-
wer supply of the machine. Power the machine on a few
seconds later for machine reset. If it becomes normal after
that, the machine is available for normal use.
USB & CARD mode operation
The device supports USB memory, and Multi Media
Card, SD, Memory Stick (MS).
(The capability of USB or card must be less then 2G)
All kind of USB and cards can be used like a disc, files in
JPEG,Mp3, WMA, VCD, AVI format can be play.
Note:
Play smoothly when TS under 1000KBP/S,
unsmooth above1000KBP/S.
Press SOURCE to choose CARD mode, plug in USB or
CARD memory, (JPEG, Mp3, WMA, VCD, AVI file inside)
then display as below:
Note:
Press (left, right key) to highlight the menu area
or the file area.
For JPEG, MP3, WMA, VCD, and AVI files, while playing
viewing files, press (Return step by step)/ STOP on your
remote control or the EXIT button on the panel (Return
step by step) to return to the menu interface.
You can press the number buttons to select a file in the
menu directly.
For example, to start from the 15th track, press --/- once
and press the number button 1 and 5 .
While viewing JPEG, press the S.SHOW (View) button
to select the display mode of pictures.
During the play or pause time, you can press (left, right
key) to switch the display angle of pictures.
„LEFT„: Press to rotate for 90 degrees negatively
„RIGHT„: Press to rotate for 90 degrees positively
Background music play
While viewing JPEG files, press the MUSIC or OK but-
ton on your control or the OK/MUSIC button on the panel
to play MP3 music files if there are such files in the card
or memory. In this way, you can view pictures while liste-
ning to music. To adjust the volume, press VOL+/ VOL- but-
ton (or press and hold the „LEFT” VOL „RIGHT” button for
three seconds).
To select the music file, press „UP„, „DOWN„ the button.
To deactivate the music, press the MUSIC or
Trouble shooting
Phenomena below are not necessary mean broken TV
set. Please check off per following methods before you re-
quest for repair.
No picture, no sound
Improper connection with AC adapter or Automobile
adapter. Use of unauthorized power supply. Power Switch
is on OFF position.
No picture
Whether the correct Channel is selected. Automatically
set up the Receiving Channel again. Any new place is sub-
ject to re-setup of channels.
No sound
Whether the sound is turned to end or under an incorrect
Sound System. Whether earphone is plugged in. Muffle
actions under too weak signal.
Dark picture
Whether Bright and Contrast is adjusted correctly; May-
be too weak signal at the receiving place.
Unclear or unstable picture
Whether antenna is adjusted in correct direction; Maybe
received the building or high reflection signal nearby.
Superposed picture
Whether antenna is in proper direction; Maybe received
the building or reflected signal nearby.
Snowstorm
Maybe under wave interference of automobile motor,
train, high voltage line and neon light.
Achromatic or interior color
Whether Color is adjusted well, whether decoloration
actions under with too weak proper signal of Color Sys-
tem.
