12” LCD TV
– 1202
13
User’s manual
Keep this machine away from too hot or too cold
places. The storage temperature of this machine is
20 ~60 , the application temperature of this machine
is 5~35 .
Never use this machine near bathtub, wash basin,
kitchen, etc places with water or at damp basement,
swimming pool or similar places.
Never make the TV set under affection of moisture,
dust or oil smoke etc. Environment.
Avoid this machine from dropping or impacting.
Never put this machine within certain box at your will
or place it at too-oscillating place and under further
severe collision.
Never extrude or frictionize this machine with sharp
objects.
Maintenance
Please plug off all connection wires before you start
cleaning this machine.
Please wipe the machine cover, display screen and
buttons with soft cloth in dipped with little soft abluent.
Never wipe this machine with abrasion cloth, abster-
gent powder, alcohol and benzene etc. various pro-
pellants or chemical cleaning media.
Operation Precautions
1. You can only use power supplied from attached ac-
cessories of AC adapter or automobile adapter (12V).
2. For the sake of safety, when you are not intended
to use the TV set, please plug off the AC adapter or
automobile adapter.
Earphone Operation Precautions
1. Please don’t tune the volume of your headphone/
earphone too high, otherwise, it may lead inconve-
nience and danger to yourself and other people.
2. If the earphone is of open design, in order not to in-
fluence other people, please tune down your volume.
3. In case of any tinnitus, please tune down the volume
or stop using this machine.
4. It is recommended by the aurists that never use the
earphone continuously for a long time.
Special Notice
A few highlights or dark spots may occur on the LCD
screen. It is a very common phenomenon to the active ma-
trix display technology, and never necessary means any
defects or faults. Never try to repair this machine by your-
self. In case of any fault or failure, please turn off the TV
set at once, and notify our Company or the corresponding
dealer. The TV set is made up of many precision electronic
components. Any disassembly or modification may lead to
damage or broken.
Remote Controller
1. Power-on/Standby button: Each press is for each
switchover between power-on and standby.
2. 0-9 and 10+ button: Number buttons.
3. Upward/
4. Leftward button
5. Downward/Channel-
6. S.SHOW: While playing JEPG files, press this button
to switch over between different playing effect (For
CARD mode only)
7. Fast reverse. (CARD mode only)
8. Play/Pause button. Each press is for each switcho-
ver between Play and Pause.
9. Stop button. Press this button to stop playing (CARD
mode only)
10. Last track/chapter. Press this button to search for last
track./chapter. (For CARD mode only)
11. REP button: Press this button to repeat all or single
track/chapter or stop repeat (CARD mode only)
