Manta DVD065, User Manual

Page: 11 / 16

USEr’S ManUaL
11
STOP
Press the button once and the player will be in memory
stop state. Continuously press this button twice and the
player will be in complete stop state.
Play/Pause
In play state, press the button for the first time and the
player will be in pause state. To resume normal playback
press the button again, In pause state or stop state, press
the button, the player will be in playing state.
/-
Press + to increase volume and press – to decrease
volume.
REPEAT
Each press of the REPEAT button will change the repeat
mode.
During VCD, CD playback, there are three modes: repeat
Single, repeat All and Off.
During DVD, playback, there are three modes: Repeat
Chapter, Repeat Title and Off.
Note:
During VCD playback, the PBC mode must be set to
Off
A-B
During playback, press A-B to select point A, press it
again to select point B. The player will repeat the section
from A to B automatically. Press A-B a third time to cancel
A-B repeat and clear points A and B.
Note:
During CD/VCD/SVCD playback, points A and B must be
within the same track.
During DVD playback, points A and B can be selected
from different chapters.
ANGLE
Press the button to view scenes shot from ANGLE differ -
ence angles. (Disc support is required)
MUTE
Press MUTE to turn off the audio, press MUTE again to
resume normal sound.
L/R
During VCD/SVCD playback, press L/R repeatedly to
select the channel of audio-output: Left/Right/Mix/Stereo.
N/P
When stop state / no disc, Press the button on the remote
control and choose Auto NTSC PAL for the TV system.
PBC
During VCD/SVCD playback, Press PBC to select the
mode of PBC On or PBC Off.
SLOW
During DVD, VCD or SVCD playback, press SLOW for
slow motion playback.
Once you press SLOW, the disc will play at different speed.
Press PLAY to resume normal playback.
V-MODE
When stop state/ no disc, Press V-MODE key, you can
select different video output mode (RGB, etc.)
RETURN
When SVCD/VCD disc playing, press RETURN button
to the main menu (PBC ON only).
HD/Res.
Press the button to switch HD video output resolution
Note:
1. Under HD mode, this button is used to adjust output
resolution.
2. Some TV set may be unable to support some resolution
fixed in the software of this DVD Player, if so TV screen
will become black. In that case, please repeatedly press
“HD/Res.” Button to go to the resolution which can be
well supported by TV set.
ZOOM
As you press the button you view the different ZOOM
magnifications of the picture.
Note:
This function may differ for different types of discs
System setup
DVD menu setup
Press the SETUP button on the remote control, the SET -
UP MENU (main) will be displayed.
After accessing the setup menu, press the direction but -
tons for up and down movement to select an item desired,
then press the ENTER button to confirm .Press LEFT direc -
tion button return to the menu of upper level.
To exit the setup, press the SETUP button again. In the
SETUP MENU, you may choose any of the following op -
tions as you like.
Language setup
Select Language in the setup menu, and display the
Language submenu:
OSD Language
Use this item to select the language of the setup menu
and screen display.
Subtitle
This option provides the preset subtitle language.
Follow the operating instructions stated in „DVD MENU
SETUP” in combination with the desired option.