Manta DVD065, User Manual

Page: 10 / 16

USEr’S ManUaL
10
Warning:
Do not connect any amplifier with coaxial
connector that does not contain Dolby digital AC 3 or DTS
decoder. Any attempt to do so and play of DVD disc will result
in damaging your speakers and causing possible hearing
injury. Other than DVD disc, VCD and CD can be operated
normally without conforming to the above restriction.
Setting of tV system
If you find the image like non-fully zoomed picture, brim
picture covered or black & white picture etc, please select
PAL or NTSC by systems setting or press N/P button to
switch the TV system on the remote control. This DVD disc
is capable of supporting different scales picture, as a result,
non-full zoomed picture could appear or picture be partially
covered on user’s TV set.
Function operation
Function Buttons on the Front Panel
These button’s function is the same as the corresponding
buttons on the remote control. For the detail information,
please see the following texts.
Function Buttons on the Remote
Control
STANDBY
Press the button once and the player will go into standby
state. Press the button again and the player will restart.
USB
Press the button to choice USB disk memory source
input.
Note:
The button is available while the player is in stop or no
disc state.
OPEN/CLOSE
To open the disc tray, press OPEN/CLOSE; To close the
disc tray, press OPEN/CLOSE again.
AUDIO
Press the button to choose different dubbing languages.
(Requires disc support)
SEARCH
For DVD discs, press the button to choose the desired title
and chapter and search the desired title time and chapter
time.
For Super VCD, VCD, CD discs, press this button to
search the desired disc time and track time and choose
the desired track.
0-9 keys
These keys are used to input the time, as well as title,
chapter and track numbers.
When a numeric item is displayed on the screen, press
the 0-9 keys to select the desired entry, and press ENTER
to confirm.
When a CD or VCD is playing (with PBC off), press the
0-9 keys to select a track directly, then press ENTER to
confirm.
CLEAR
Press CLEAR to delete numbers you have entered.
MENU
During DVD playback, press MENU to display the disc
menu of the current title.
Note:
This function is subject to the disc
SETUP
Press the button to enter the system setting menu. press
the button again to exit the menu.
DISPLAY
Press the button to show the information of the current
playing disc.
TITLE
Press the button to enter the appointed title. (Requires
disc support)
Direction key (UP/DOWN/RIGHT/LEFT)
Press the keys to move the highlighted bar or cursor on
any menu to your selection.
ENTER
Press the button to confirm your choice on screen.
REV
During DVD, CD or VCD playback, press REV to scan
in reverse.
The player will review the disc at different times speed.
Press PLAY to resume normal playback.
FWD
During DVD, CD or VCD playback, press FWD to scan
forward.
The player will cue the disc at different speed. Press PLAY
to resume normal playback.
PREV
During DVD, CD or VCD playback, press PREV to play
the previous chapter, title or track.
NEXT
During DVD, CD or VCD playback, press NEXT to play
the next chapter, title or track.
STEP
Press the key, You can play the disc step by step, in this
way, you can catch any picture on the disc (not for mp3,
WMA, CD…). Press Play button to play normally.