BASIC 2
36
Black & White picture
Damaged S connector (bent pin)
The playback picture has occasional distortion
A small amount of picture distortion may appear be-
cause of a poor quality video/sound transfer to disc.
This is especially true of some discs manufactured
between 1997-1998.
Scratched disc
Brightness is unstable or noises are produced on
playback pictures
Connect the DVD player directly through the TV and
not through any other source. What you’re viewing is
the effect of the copy protection circuitry required on
all DVD players.
If you don’t have a video input on your TV, you must
purchase an RF adapter from your dealer
The DVD video player does not start playback
Place the disc with the graphics side up.
Place the disc on the disc tray correctly inside the guide.
Make sure the disc is free from scratches & fingerprints.
Press the SETUP button to turn off the menu screen.
Cancel the parental lock function or change the pa-
rental lock level.(The Pre-set password is 3308.)
Turn the power off then disconnect the power plug
and reinsert it back into the wall. Retry again.
Specification
Power supply:
~230V/50Hz
Power consumption:
20W
Weight of Player:
1.5kg
External dimensions:
230 x 245 x 55 mm (L/W/H)
Signal system:
AUTO/NTSC/PAL
Laser:
Semiconductor laser, wavelength 650 nm
Summary of Contents for DVD-027 Basic 2
Page 37: ...BASIC 2 37 Note ...
Page 38: ...BASIC 2 38 Note ...
