DVD
-004
LaScala
43
ADVANCED
OPERATION OF
PLAYBACK
REPEATED Playback
TITLE/CHAPTER Repeat
When the [
REPEAT
] button is pressed, the repeated
playback is triggered and the OSD message is changed in
cycles of “CHAPTER REPEAT ON”, “TITLE REPEAT ON”,
and “REPEAT OFF.”
–
CHAPTER REPEAT
- Enables the repeated play-
back of a chapter for a DVD disc or track for a Audio
CD disc or a VCD disc.
–
TITLE REPEAT
- Enables the repeated playback of
a title for a DVD disc or a disc for a Audio CD disc or
a VCD disc.
–
REPEAT OFF
- Resumes normal play.
A-B Repeat
You are able to perform a repeated playback between
any two points of a track or a chapter.
1. Press the [
A-B REPEAT
] button during playback to
set the beginning point (A). The OSD message “A
TO B SET A “ will be shown on the right lower screen
corner.
2. Press the [
A-B REPEAT
] button again to set the end
point (B). The OSD message “A TO B SET B ” will
be shown. In the meantime, the repeated playback
begins between the two points, A and B.
3. Pressing the [
A-B REPEAT
] button again resumes
normal play. The OSD message “A TO B CANCEL-
LED” will be shown.
SET A
SET B
PROGRAM Playback
Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
Track Program
1. Press the [
PROGRAM
] button to program the tracks
for program playback during STOP status.
2. Use the numbers on the remote control to begin pro-
gramming. Press the corresponding track number in
the same sequence as your desired playback order.
For example: To program tracks 2, 4, 6 (in the same
order), simply press key digits [
2
], digit [
4
], digit [
6
]
sequentially.
– A number larger than 10 must be keyed by using
[
+10]
additionally. For example, “22” is keyed in by
pressing [
+10
] twice and then [
2
] once.
NOTES
: The maximum program capability is 99 tracks.
Start/Cancel the Program Playback
– Press the [
PLAY/PAUSE
] to start the program play-
back in the order that you programmed it.
– Press the [
STOP
] button to stop playback, press
[
PROGRAM
] to reset program order, press [
PRO-
GRAM
] again to cancel the program function.
– During the program playback, the [
NEXT
] button and
the [
PREV
] button can be used to advance to the
next programmed track or go back to the previous
programmed track.
TITLE MENU (DVD Only)
Some DVD discs have a title menu recorded within them
to use for selecting titles for play. This feature will only work
with these discs.
– Press the [
TITLE
] button during playback to reach
the title menu. Pressing the [
TITLE
] button again
resumes the playback of the scene when the [
TITLE
]
button was first pressed.
