DVD
PLAYER
Strona
29
CHANNEL
There are output mode in setup for you to select:
- 5.1CH - 5.1 channel output
- 2CH - 2 channel output
CEN&SUB
When 5.1CH Surround Sound is played, this item is used to adjust center and surround speakers.
It includes:
- LARGE
- SMALL
- OFF
Note!
IF you have connected the system to a speaker with low frequencies of 100Hz or below,
select “LARGE”.
Note!
IF you have connected the system to a speaker without low frequencies of 100Hz or below,
select “SMALL”. But if you don't connect a subwoofer, always select “LARGE”.
SUBWOOFER
When 5.1CH Surround Sound is played, this item is used to adjust the volume of Subwoofer. It
includes:
- ON
- OFF
Note! You can customize the sound to conform to the acoustics of your room by adding a
delay effect to the sound of the Center and Surround speakers.
CENTER DELAY
IF the distance of Front Speaker is longer than that of Center Speaker, change the setting
according to the table below.
Distance (cm)
Setting (ms)
34
1
68
2
102
3
136
4
170
5
SURROUND DELAY
IF the distance of Front Speaker is longer than that of Surround Speaker, change the setting
according to the table below.
Distance (cm)
Setting (ms)
170
5
340
10
510
15
Warning! Only disks with 5.1 chanel sound can be played with surround
system. Stereo disks can be played only on two speakers.
