Manta BlackBox 2 FullHD MM310, User Manual

Page: 5 / 42

5
For the power capacity in the battery, refer to the following icons:
Full Middle Low
1. Connect device to car charger through Mini-USB port, device will power
on automatically to enter standby mode and start charging with green
indicator light ON.
Once device been fully charged, green indicator light goes out.
2. . Connect device to PC via USB cable, device will power on automatically
to enter mode choice between ‘Mass Storage (MSDC)’ and ‘PC-Cam’,
press ‘UP’/’DOWN’ to choose the desired mode and ‘OK’ button to enter
your choice and start charging.
Once device been fully charged, green indicator light goes out.
Installation and Removal of Micro SD card
1. In the direction as indicated, insert the Micro SD card into the slot until
it is held firmly.
2. To take the Micro SD card out, slightly press the
Micro SD card to eject it out.
NOTE:
1.Observe the direction to insert the Micro SD card; if the direction is reverse,
the device and the Micro SD card may be damaged.
2.When the Micro SD card is inserted into the device, the machine will set
the Micro SD card as preset storage unit and the data in the original Micro
SD card will be unreadable
3. If the Micro SD card is incompatible with the device, please insert the