Introduction
A high power smart charger designed for fast & safe charging of Lead Acid and LiFePO4 batteries
with optional WiFi / Bluetooth connectivity for remote monitoring of charging status of battery. The
advanced Micro-processor control allow specific charging profile for Lead, AGM and LiFePO4 battery
from 16AH to 200AH.
Features
* Microprocessor Control with different charging profiles for Lead Acid based & LiFePO4 battery.
* One button selection of battery types then set and forget operation.
* Microprocessor constantly monitors the battery status to deliver the right amount of charge.
* Thermal control regulates charging current in hot or enclosed environment.
* Charger can be connected for long period of time to battery without overcharge or drying out of the
battery.
** For Lead Acid based battery:-
A. Cold & normal temperature charge selection for Lead & AGM type.
B. Initial qualifying checks, with auto-repair (max. 8 hour) for sulphated battery or soft-bulk for
deeply discharged battery, then full bulk , pulse absorption and free float charge stages.
** Special charging profile for LiFePO4 battery: soft-bulk, bulk then free float stage. No auto-repair.
** Extensive Protections: spark proof, short circuit, reverse polarity.
* Supplied with 2 exchangeable leads with clamps & eyelet terminals.
** There is a WiFi or Bluetooth version of same charger to for remote monitoring of charging status
of battery on smart phones.
Safety
●
In the event of persistent rising temperature, charger will shut down its output with warning led.
●
Spark free - charger only starts charging when it is connected to a suitable battery so no spark
during first contact with battery terminal.
●
Maximum repair charge period is 8 hours and charger will indicate battery is defective.
●
Convection cooled with thermal regulation to lower the charging current till unit's temperature
drops.
●
Over Voltage Protection-Charger will shut down when output senses higher than 16.5V & charger
recovers when fault disappears.
●
Auto shut down when Bulk & Absorption charge is over 40 hours to avoid waste of energy on
defective battery.
●
Reverse Polarity & Short Circuit Protection with warning LED, charger returns to normal when fault
is cleared.
