Manson Engineering Industrial SBC-8188 User Manual Download Page 2

WARNING:

 

Failure to heed this warning may cause injury to persons and damage to Equipment.

 

 

CAUTION:

 

Failure to observe this warning may result in damage to equipment

 

and improper functioning of the Charger.

 

 

WARNING: 

 

 

The charger is 

not 

designed for any life saving application. 

 

 

The charger is designed for in-door use. Protect the charger from ingress of water. 

 

 

This charger is made to charge only properly sized lead acid batteries and Lithium Fe PO4 (LFP).

 

 

Don't recharging non-rechargeable batteries. 

 

 

Charging other types of battery or under-sized lead acid batteries may cause fire or explosion.

 

  Install the charger in accordance with all local codes.   

 

Do not use the charger if it has been dropped or damaged. 

 

 

Do not remove casing of the charger, there is no user -serviceable parts inside. 

 

 

Do not charge the battery on boats. Remove the battery and charge on shore. 

 

 

Never attempt to charge a frozen battery. 

 

 

Never attempt to charge a damaged battery. 

 

 

Wear protective goggles and turn your face away when connecting or disconnecting the battery.

 

 

Never place the charger on top of a battery. 

 

 

Never smoke, use an open flame, or create sparks near battery or charger during normal charging 

 

operation as batteries may give out explosive gas.   

 

Operation as batteries may give out explosive gas. 

 

 

Do not charge batteries in an enclosure (box- in) due to possible explosion of entrapped explosive 

 

gas.   

 

Use of accessory not recommended may cause risk of fire, electric shock. 

 

 

Disconnect the mains supply before connecting or disconnecting the links to the battery. 

 

 

If the charger does not work properly or if it has been damaged, unplug all connections. 

 

 

Copy Right

 

All rights reserved. 

 

No part of this publication may be reproduced, or transmitted in any form or by any means without the 

written permission from Manson Engineering Industrial Ltd. 

 

Changes in the manual. 

 

Manson Engineering Industrial Ltd. has the right to update and change the content of this manual 

without any prior notice and obligation. 

 

 

Disclaimer

 

Exclusions for documentation, Indemnity and Product application. 

 

Manson Engineering Industrial Ltd. (Manson) 

 

1.  Assumes no warranty to the accuracy, suitability of technical information given in the user 

 

manuals or other documentation. 

 

2.  Undertakes no responsibility or liability of losses, damages and related expenses whether specific, 

 

direct, indirect consequential or accidental which might result from the use of information given in 

 

this manual. 

 

3.  Shall not be liable to anyone for any special, collateral, incidental or consequential damages in 

 

connection with or from the use of these Manson products. The sole and exclusive liability to 

 

Manson, regardless of the form of action shall not exceed the purchase price of the Manson 

 

product.

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SBC-8188








Reviews: