25
Section 7
NORMAL SERVICE
According to the use, but at least once a day, clean the machine as per Section 6.
Sharpen the blade as necessary.
Check the power cable integrity.
Sometimes remove dirty from the sliding bar of the food carriage and lubricate the sliding surfaces with
Vaseline oil (Fig.26).
Ask for the authorised TAS to replace the grinding wheel and the finished grinding wheel when worn.
Check on the diameter of the blade after sharpening, to program replacement with a new one once the blade
diameter has been reduced by 10 mm (max. permissible gap between the blade guard and the cutting edge =
6 mm). Replacement of a worn blade must be carried out by the authorised TAS
Substitute the blade by TAS authorised Manconi, when the gap between the blade and the blade guard reach
6 mm.
Keep lubricated with foodstuff oil the sliding pins of all the last slice devices and sliding plates.
Pic. 26 – Lubrifications points