Operating Manual
PR-101131-0121 Version 180905
12 of 16
hoses. The pull force is only working in axial direction. After releasing both halves remain at the end of each
hose. This prevents the outflow of liquids or gases from both product carrying ends of the line.
Maintenance tasks, to put the released coupling back into service, may be performed only by
trained personnel from an authorised professional workshop. All measures necessary for
inspection, maintenance and repair must be carried out in accordance with the national
regulations of the country where the system is installed.
M
AINTENANCE AND SERVICE INSTRUCTION
Always depressurise the system and rinse off the parts before beginning any maintenance
work. Use protective goggles. Do not handle O-ring seals if the material appears charred,
gummy or sticky.
Use tweezers; wear gloves and protective goggles in appropriate material, consult the material
safety data sheet (MSDS) of your product. Do not touch adjacent parts with unprotected
hands. Rinse off the parts once again before starting the “daily inspection”
S
PARE PARTS AND TOOLS
Breaking-bolt-kit
3 Breaking bolts.
In case of failure or break away order the CBC-BOLT SET and carry
out repairs according to the assembly instructions.
Attention:
Do not forget to specify the proper size and breaking force!
Please check with the information on the ID-plate and the head of the
bolt.
Outer body sealing ring
