Mannesmann Rexroth Indramat ECODRIVE DKC01.1 Project Planning Manual Download Page 34

Page: 34 / 108

4-8

ECODRIVE DKC drive controllers

ECODRIVE DKC01.1/DKC11.1 Drive Controllers

DOK-ECODRV-DKC01/11.1*-PRJ3-EN-P

4.2 Firmware

The firmware located in the drive controller determines the functional
features of the ECODRIVE drive controller.

The firmware "FWA-ECODRV-ASE-02VRS-MS" is for the drive control-
lers DKC01.1-*** and DKC11.1-***.

The firmware has its own order number. This means that it is always pos-
sible to order the identical firmware version.

The firmware is updated constantly to eliminate any bugs without altering
the functionality. It is identified on the type code as the firmware release
version.

If newer functions are added, the index of the firmware version is incre-
mented (see type codes).

FW A-ECODRV-ASE-02 V RS-MS

(01...99)

TL0202.fh5

ECODRV

Test version

Standard

ASE

Parallel interface

Firmware-Version

Firmware-type

(alphnumeric)

Name of product

Product: ECODRIVE

Class

Product (machine)

Item i. d.

Firmware

Type codes:

Example:

Firmware type

Firmware-release-status (Update)

The status at the time of

delivery.

Language (abbrev. see

INN 09.04, sec. 1)

Multilingual

Fig. 4-12: ECODRIVE firmware type code

TS0201.fh5

FWA-ECODRV-ASE-02VRS-MS
266285

SN266285-06394

K19/96

V01

Production week

Serial number

Release status

Barcode

Part no.

Firmware-type

Fig. 4-13: Firmware rating plate

Buy: www.ValinOnline.com | Phone: 844-385-3099 | Email: [email protected]

Summary of Contents for Indramat ECODRIVE DKC01.1













































































































Search results

Summary of Contents for Indramat ECODRIVE DKC01.1

Reviews:

Related manuals for Indramat ECODRIVE DKC01.1

Brands by name

Popular brands

Mannesmann Rexroth Indramat ECODRIVE DKC01.1, Project Planning Manual

Search results

Summary of Contents for Indramat ECODRIVE DKC01.1

Reviews:

Related manuals for Indramat ECODRIVE DKC01.1

Brands by name

Popular brands