Place the grate into the tub that does
not have a bottom. Place that tub on top
of the tub with the honey gate. When
positioned as shown, the tub is used for
uncapping.
Place the Wood End Bars on top of each other and insert them wide end first into
the back of the Honey Gate and unscrew the back from the front of the Honey
Gate. Place the Honey Gate front on the outside of the Gray Tub and the Honey
Gate back on the inside of the tub and tighten both pieces together, using the
Wood End Bars to help tighten the Honey Gate securely.
See above photos.
Take the pointed screw and insert it into
the pre-drilled hole of the wood cross
bar. Your frame will rest on this screw
during uncapping.
Attach the crossbar to the tub
with the bolts and nuts provided.
In general, hand tightening of the
crossbar is all that is necessary.