background image

MANN+HUMMEL Industrial Filters 

3

NLG 

2.  Safety

2.1  Warning instructions and symbols

All instructions marked with this sym-

bol must be observed closely in order 

to avoid damage to or the destruction 

of filter components.

This  symbol  indicates  that  special 

attention must be paid to these instruc-

tions in order to ensure trouble-free, 

economical operation.

2.2  Intended use

The filter may only be maintained by quali

-

fied, authorised personnel.
The filter is constructed to the state-of-the-

art and in accordance with recognised safety 

specifications. However, the functional safety 

of downstream assemblies may be affected 

if:

– the filter is used incorrectly or for a purpose 

for which it was not intended,

– the operating conditions change,

-  modifications are made without consulting 

the manufacturer

– necessary maintenance and repair work is 

not performed.

Use the filter only if in perfect condition and 

in accordance with the respective technical 

specifications, observing correct procedures 

regarding safety and danger, and in compli-

ance with the operating instructions. In par-

ticular, malfunctions that may affect safety 

must be eliminated immediately.
The  filter  is  designed  exclusively  for  the 

mechanical filtration of air. Other applications, 

e.g. filtering aggressive, combustible and/or 

explosive materials is considered incorrect 

use. In this case, the manufacturer/supplier 

will reject all liability in event of resultant dam-

age.

Intended use also includes observing operat-

ing instructions and complying with inspection 

and maintenance requirements.

It is imperative for the operator to check the 

filter regularly for externally visible signs of 

damage or faults (when servicing at the lat-

est).

All labelling and identification marks on the 

filter must be legible at all times.

3.  Functional description

The NLG series is a air cleaner designed for 

cleaning intake air induced by all types of 

machine (e.g. motors, compressors, fans). 

One and two-stage versions (Piclon) are 

available.

With a two-stage filter, the induced air is cir

-

culated in the filter housing by guide vanes. 

The centrifugal forces generated here force 

heavy dust particles outwards against the 

housing wall and discharge them via the dust 

discharge valve in the lower section of the 

housing (1st filter stage).This option is par

-

ticularly suited to applications with high levels 

of dust.
The induced air is cleaned and reaches the 

air outlet spigot through the main element 

(second filtering stage) and the downstream 

secondary element (optional). The specified 

dimensions mean that the filter elements seal 

radially to the clean-air spigot on the hous-

ing.

With the one-stage filter (Pico), the induced 

air will be cleaned directly by the main ele-

ment.

Summary of Contents for NLG Series










Reviews: