background image

1

Manual

     Thank you for your purchase of the Transmate DeChlorinator. Please read and understand 

this short operation manual. Our goal is to serve you, our customer. If you have any questions 

or improvement suggestions please call us at 1-800-426-9341. 

    

    

Romac Industries, Inc.

21919 20th Avenue SE • Suite 100 • Bothell, WA 98021

800 426 9341 • 425 951 6200 • Fax 425 951 6201 • www.romacindustries.com

deChlorinator Operations Manual 

08/30/2018 

Rev.

TM

Transmate

deChlorinator

TABLE OF CONTENTS

Solution Mixing ...........................................................................................................pg. 2
Components ...............................................................................................................pg. 3
Set-Up .......................................................................................................................pg. 4 
Operation....................................................................................................................pg. 5 
Toubleshooting ...........................................................................................................pg. 6 

Summary of Contents for Transmate deChlorinator









Reviews: