background image

General Information

Section 1

1-4

Part Number 000002477 3/08

Owner Warranty Registration Card

GENERAL

The packet containing this manual also includes 
warranty information. Warranty coverage begins the day 
the ice machine is installed.

If the OWNER WARRANTY REGISTRATION CARD is 
not returned, Manitowoc will use the date of sale to the 
Manitowoc Distributor as the first day of warranty 
coverage for your new ice machine.

Warranty Coverage 

COMMERCIAL ICE MACHINE LIMITED WARRANTY

The following Warranty outline is provided for your 
convenience. For a detailed explanation, read the 
warranty bond shipped with each product.

Contact your local Manitowoc Distributor or Manitowoc 
Ice, Inc. if you need further warranty information.

PARTS

1. Manitowoc warrants the ice machine against defects 

in materials and workmanship, under normal use 
and service for three (3) years from the date of 
original installation.

2. The evaporator and compressor are covered by an 

additional two (2) year (five years total) warranty 
beginning on the date of the original installation.

LABOR

1. Labor required to repair or replace defective 

components is covered for three (3) years from the 
date of original installation.

2. The evaporator is covered by an additional two (2) 

year (five years total) labor warranty beginning on 
the date of the original installation.

EXCLUSIONS

The following items are not included in the ice machine’s 
warranty coverage:

1.

Normal maintenance

, adjustments and cleaning as 

outlined in this manual.

2. Repairs due to unauthorized modifications to the ice 

machine or use of non-standard parts without prior 
written approval from Manitowoc Ice, Inc.

3. Damage caused by improper installation of the ice 

machine, electrical supply, water supply or drainage, 
or damage caused by floods, storms, or other acts of 
God.

4.

Premium labor rates

 due to holidays, 

overtime

etc.; travel time; flat rate service call charges; 
mileage and miscellaneous tools and material 
charges not listed on the payment schedule. 
Additional labor charges resulting from the 
inaccessibility of equipment are also excluded.

5. Parts or assemblies subjected to misuse, abuse, 

neglect or accidents.

6. Damage or problems caused by installation, 

cleaning and/or maintenance procedures 
inconsistent with the technical instructions provided 
in this manual.

AUTHORIZED WARRANTY SERVICE

To comply with the provisions of the warranty, a 
refrigeration service company qualified and authorized 
by a Manitowoc distributor, or a Contracted Service 
Representative must perform the warranty repair.

NOTE: If the dealer you purchased the ice machine from 
is not authorized to perform warranty service; contact 
your Manitowoc distributor or Manitowoc Ice, Inc. for the 
name of the nearest authorized service representative. 

SERVICE CALLS

Normal maintenance, adjustments and cleaning as 
outlined in this manual are not covered by the warranty. 
If you have followed the procedures listed in this manual, 
and the ice machine still does not perform properly, call 
your Dealer, Local Distributor or the Service Department 
at Manitowoc Ice, Inc.

Important

Complete and mail the OWNER WARRANTY
REGISTRATION CARD as soon as possible to
validate the installation date.

Summary of Contents for S model









































































Reviews: