Manitowoc Lincoln 2500 Series, Installation, Operation And Maintenance Manual

Page: 17 / 24

Part Number 20000260 Rev E 1/15 17
Operator Maintenance
n
Warning
Disconnect power supply before servicing or cleaning
this oven. Safeguard power so it cannot be accidentally
restored. Failure to do so could result in dismemberment,
electrocution, or fatal injury.
The Lincoln Countertop Impinger® Oven contains electrical
components. Before cleaning the oven, switch off and
disconnect the oven from the electrical supply.
No electrical components should be subjected to moisture.
Therefore, it is important the oven is wiped down carefully.
NEVER throw buckets of water over the oven or subject it to
pressure washing from a hose or a pressure spray. If water
or other liquid is spilled on the oven, make sure that none
has entered the control box area before switching on. If in
doubt, call your service company.
To achieve the maximum efficiency of the oven, it is
necessary to keep it clean. The frequency listed is only the
factory’s recommendation. Your use and type of products
will actually determine the frequency of cleaning.
,
Caution
Oven must be cool. Do not use power-cleaning
equipment, steel wool, or wire brushes on stainless steel
surfaces.
Daily Cleaning
1. Clean exterior surfaces of the oven by wiping it down
with a mild detergent and clean water, or a commercial
stainless steel cleaner.
2. Clean the interior by sweeping up all loose particles,
then wash with a mild detergent solution and rinse
with clean water.
3. Clean the conveyor belt by wiping with a clean, water-
dampened cloth to remove any baked on crust or food
product.
,
Caution
Do not use caustic or alkaline base cleaner on interior
of oven. This will ruin the aluminized finish of the oven
interior. On exterior of oven, removal of deposits of
baked-on splatter, oil, grease, or light discolorations may
be removed with any of several commercial cleaners.
Consult with your local supplier.
n
Warning
When using cleaning solutions, be sure they meet local
and national health standards.
Weekly Cleaning
1. Remove conveyor, disassemble and clean. See
Conveyor Removal section for more information.
2. Remove fingers, disassemble and clean. See Finger
Removal section for more information.
Section 4
Maintenance