Manitowoc Lincoln 2500 Series, Installation, Operation And Maintenance Manual

Page: 14 / 24

14 Part Number 20000260 Rev E 1/15
Operation Section 3
Operating Instructions
Prior to operating your new countertop oven, it is important
to understand the options available to you. Following is a
chart to better illustrate these options.
Controls Description
Belt Speed /
Time Control
Belt speed refers to how quickly the food item
travels through the oven. This is shown on the
display board as a unit of measure (fast to slow)
between :30 seconds and 15:00 minutes.
Temperature
Control
The countertop oven will allow you to increase
or decrease the desired temperature setting.
This is shown on the display board as a unit of
measure between 90°F (32°C) - 600°F (316°C).
Belt Direction
The Countertop Oven will allow you to change
the direction in which the conveyor belt moves.
Pressing the Belt Direction Button will change
the direction of travel between left-to-right and
right-to-left options.
POWER-UP THE OVEN
1. Turn the on/off switch to the ON position. The oven
will now run according to the previously programmed
settings.
On/Off Switch
2. Allow the oven to preheat for approximately
30 minutes.
CHANGE BELT DIRECTION
Press the belt direction button to change the direction in
which the conveyor belt travels.
Belt Direction Button
SHUTDOWN
1. Push the on/off switch to the OFF position.
2. As each countertop oven is equipped with a 30-minute
cool-down timer, the fan motor will continue to run
for 30-minutes after the unit has been turned off. The
fan motor will automatically stop at the end of the
30-minute cool-down period.
On/Off Switch
Programming
PROGRAMMING THE FOUR MENU PRESET BUTTONS
1. Press and hold the desired menu button (1-4) for
approximately 5 seconds. The display screen will flash
the temperature setpoint. Press the (+) or (-) button to
reach the desired temperature.
NOTE: All menu presets come with default settings of Pizza
at 550°F / 6:00.
Menu Preset Buttons
2. Press and release the menu button again to reach the
time/belt speed setpoint. The display will flash the
time/belt speed setpoint. Press the (+) or (-) button to
reach the desired time/belt speed.
3. Press and release the menu button again to reach the
menu item name. The display will flash a menu item
name. Press the (+) or (-) button to locate the desired
name.
NOTE: The following menu items have been preset into the
software package of this oven.
- Pizza
- Wings
- Breakfast
- Breadsticks
- Thin Pizza - Sandwich
- Chicken
- Snack
- Lunch
- Dinner - Wrap
- Menu 1
- Menu 2
- Menu 3
- Menu 4
4. Once the desired name has been selected, press and
release the menu button again to activate the menu
setting.