GROVE
Published 1-20-2017, Control# 483-02
10-17
CD5515-2/YB5515-2 SERVICE MANUAL
STEERING SYSTEM
10
12.
A small mark has been made with a pumice stone on
both spool and sleeve close to one of the slots for the
neutral position springs (Figure 10-25). If the mark is not
visible, remember to leave a mark of your own on sleeve
and spool before the neutral position springs are
dismantled.
13.
Carefully remove the spool out of the sleeve (2,
Figure 10-18).
14.
Press the neutral position springs (9) out of their slots in
the spool.
15.
Remove dust seal and O-ring / Kin-ring / Roto Glyd
(Figure 10-27).
16.
Remove plugs from shock valves using a 6 mm Allen
wrench (Figure 10-27).
17.
Remove seal washers (Figure 10-28).
18.
Unscrew the setting screws using a 6 mm Allen wrench
(Figure 10-29).
19.
Shake out the two springs and two valve balls into your
hand (Figure 10-30). The valve seats are bonded into
the housing and cannot be removed.
FIGURE 10-24
FIGURE 10-25
FIGURE 10-26
FIGURE 10-27
FIGURE 10-28
FIGURE 10-29
Reference Only
