4-4
Maintenance
Section 4
SANITIZING PROCEDURE
Use sanitizer to remove algae or slime. Do not use it
to remove lime scale or other mineral deposits.
Step 1
Set the toggle switch to the OFF position
after ice falls from the evaporator at the end of a
Harvest cycle. Or, set the switch to the OFF position
and allow the ice to melt off the evaporator.
CAUTION
Never use anything to force ice from the
evaporator. Damage may result.
Step 2:
Remove all ice from the bin.
Step 3
Refer to removal of parts for cleaning /
sanitizing and remove ice machine parts.
Step 4
Mix a solution of 15 liters of water with
90 ml sanitizer.
Step 5
Use the sanitizing solution and a sponge or
cloth to sanitize (wipe) all parts and interior surfaces
of the ice machine. Sanitize the following areas:
•
Side Walls
•
Base (area above water trough)
•
Evaporator plastic parts
•
Bin or dispenser
Step 6
Rinse all sanitized areas with clear water.
Step 7
Install the removed parts, restore power and
place toggle switch in the WASH position.
Step 8
Add the proper amount of Ice Machine
Sanitizer to the water trough.
Model
Amount of Sanitizer
ECV100 90ml
Step 9
The ice machine will automatically time out a
ten-minute sanitizing cycle, followed by five rinse
cycles, and then stop. This entire cycle lasts
approximately 22 minutes.
Step 10
When the sanitizing process stops, move the
toggle switch to the ICE position.
Summary of Contents for EC Serie
