Part Number 4520898 Rev 7 11/15 37
INSTALLING THE AIR INTAKE KIT (P/N 95000021)
Notice
The maximum length of the air duct must not
exceed 244cm [96”].
The Air Intake Filter should be in visible view, easily
accessible, and labeled. Operators have to inspect
and clean the air filter(s) regularly. A blocked filter
can cause electronic damage to the induction unit.
Components
1
Air Intake Filter (part no. 71000003)
2
Air Filter Holder (part no. 72183091)
3
Filter Holder Front Plate (part no.
72204090)
4
Air Duct Flange (part no. 72263020)
5
Hose Clamp (x2) (part no. 76000002)
6
Flex Aluminum Air Duct (part no.
76000001)
7
Silicone Adhesive, PACTAN 7076
(part no. 70000015)
8
Caulking Gun (part no. 76000003)
1
2
3
4
5
5
6
3
2
1
5
6
7
8
4
5
To install the air intake kit:
1. Fasten the air duct flange (from the air intake kit) onto
the cooling fan, which is located on the bottom of the
appliance. Fasteners (4 screws and 4 nuts) are provided
in the kit.
2. Mount the air filter holder with front plate onto the
cabinet. For cut-out dimensions, see section Cut-Out
Dimensions: Air Intake Kit Air Filter Holder on page
3. Use the hose clamps to attach the air duct to the filter
holder (Step 2) and the air duct flange (Step 1).
4. Insert the air intake filter and label the location of the
filter for the kitchen staff. Frequent inspection and
cleaning of the filter is required.
Summary of Contents for BH/IN 2500
Page 55: ......
