1 - 24
p
When operating and moving the machine, remember that the radio remote control does not intervene autonomously
when potential hazardous situations are displayed and signalled.
Operation with display.
If the transmitting unit has a display, it is possible to visualize signal icons, measurements collected from the machine and
their description (See chapter: 2-DESCRIPTION).
Operation with LED.
If the transmitting unit has an LED array, particular machine conditions are signal
led if they are on (See chapter: 2-DESCRIPTION).
Radio link interruption.
When the radio link is incorrect or interrupted for a certain period of time, the passive stop function automatically cuts in.
The green LED on the transmitting unit switches from blinking slowly to fast blinking.
The POWER LED on the receiving unit switches from blinking to steady on.
Press the START pushbutton to start the radio remote control.
Transmitting unit automatic switch off.
The transmitting unit automatically switches off when:
- the battery is flat,
- the radio remote control is not used
- for a certain time,
- the transmitting unit is powered and never switched off for eight hours non stop.
The green LED on the transmitting unit switches off.
The POWER LED on the receiving unit switches from blinking to steady on.
Press the START pushbutton to start the radio remote control.
Low battery.
The transmitting unit indicates if the battery is not sufficiently charged (the red LED blinks and an acoustic signal sounds).
The transmitting unit automatically switches off after 3.5 minutes from the
beginning of the signal.
The battery shall be replaced with a charged one.
When the transmitting unit is not used.
If the transmitting unit stays on for a time equivalent to the “automatic switch off time” without any of the commands activated,
it automatically switches off after this time has elapsed.
Non-stop use.
The transmitting unit indicates if it has been used for eight hours non-stop (the red LED blinks and an acoustic signal sounds).
The transmitting unit automatically switches off after 3.5 minutes from the beginning of the signal.
Switching off the transmitting unit.
The transmitting unit shall be switched off each time work is stopped: remove the S-KEY and always store it in a safe place.
Switching off the receiving unit
The receiving unit shall be switched off each time the radio remote control is not used to control the machine. Remove power
from the unit to switch it off.
649010
EN/US/AU
(16/07/2018)
MHT
790
104JD
H
ST4
S1
Summary of Contents for MHT 790 104JD H ST4 S1
