Manitou 105 VJR 2 Operator'S Manual Download Page 34

Page: 34 / 70

8 - P

ENDULAR LIFTING AND LOWERING SWITCH

This switch allows lifting and lowering of the pendular arm.

LIFTING OF THE PENDULAR ARM

- Place the base/basket switch in the base position, keep the "dead man" but-

ton pushed and push the switch 8 upwards.

LOWERING OF THE PENDULAR ARM

- Place the base/basket switch in the base position, keep the "dead man" but-
ton pushed and push the switch 8 downwards.

9 - M

AST LIFTING AND LOWERING SWITCH

This switch allows lifting and lowering of the mast.

MAST LIFTING

- Place the base/basket switch in the base position, keep the "dead man" but-

ton pushed and push the switch 9 upwards.

MAST LOWERING

- Place the base/basket switch in the base position, keep the "dead man" but-

ton pushed and push the switch 9 downwards

10 - T

URRET ROTATION SWITCH

This switch allows the rotation of the turret.

TURRET ROTATION TO THE RIGHT

- Place the base/basket switch in the base position, keep the "dead man" but-

ton pushed and push the switch 10 to the right.

TURRET ROTATION TO THE LEFT

- Place the base/basket switch in the base position, keep the "dead man" but-

ton pushed and push the switch 10 to the left.

2 - 16

Summary of Contents for 105 VJR 2







































































Search results

Summary of Contents for 105 VJR 2

Reviews:

Related manuals for 105 VJR 2

Brands by name

Popular brands

Manitou 105 VJR 2, Operator'S Manual

Search results

Summary of Contents for 105 VJR 2

Reviews:

Related manuals for 105 VJR 2

Brands by name

Popular brands