2
INDEX
GENERAL SAFETY REQUIREMENTS
CONNECTORS AND DEFINITION
FRONT PANEL CONTROLS
REMOTE CONTROL FUNCTIONS
INSTALLATION
PROGRAMMING THE RECEIVER
TUNING SERVICES FIRST TIME
WEDGING/ADJUSTING ANTENNA
EDITING THE CHANNEL LIST
ADJUSTING OUTPUT SIGNAL TO TV
2
3
3
3
4
5
5
5
6
8
ACCESSING THE EPG (Electronic
Program Guide)
TIMER PROGRAMMING FOR VCR
PARENTAL CONTROL
SELECTING RADIO CHANNELS
RESETTING THE RECEIVER
ASSISTANCE AND ADVICE
GLOSSARY
MULTIPLEXES & CHANNEL
S
GENERAL SPECIFICATIONS
8
9
10
10
10
11
12
13
16
INTRODUCTION
Please read this manual and the following general safety requirements carefully before
installing the receiver. If you come across a word that you do not understand, please
refer to the Glossary at the end of this manual.
The
Plaza DT-100
is a high performance Digital Terrestrial Television (DTT) Receiver,
supporting various requirements of broadcast standards. This receiver includes the best
possible features together with the most up-to-date electronics hardware and easy to use
on-screen menu.
GENERAL SAFETY REQUIREMENTS
Remember that contact with 230V AC mains can be lethal or can cause severe electric
shock. To avoid this risk please follow below instructions
This product is to be operated indoors only. Do not expose the receiver to rain
or moisture.
Do not place your receiver close to sources of heat, such as heater and direct
sunlight.
Never remove the top cover of the receiver. There are no user serviceable
parts inside. Refer all servicing to qualified service agents.
Disconnect the power before connecting or disconnecting anything.
Do not place anything on your receiver that might drip or spill onto it. Never
place the product near objects filled with water.
Do not obstruct the ventilation slots of the receiver. Do not place the receiver on
soft furnishings or carpet. Maintain a free airflow around the receiver.
Do not use solvents of any kind to clean the receiver, only use a soft-dry cloth.
CONNECTORS AND DEFINITIONS
Please do not connect power to the receiver until all other connections have been made.
