MSKL MS-3020 User Manual
5.
Install the other hard disk drives by repeating step 1 to 4.
Then, set the hard disk drives as Master or Slave in accordance with figure 2-8. Connect in this way,
otherwise the signal LEDs cannot display correctly.
HDD1_PRI_MASTER
HDD2_PRI_SLAVE
HDD3_SEC_MASTER
HDD4_SEC_SLAVE
Figure 2-8
2.5 Connect the SCSI Port
Connect one MS-3020
Connect any one of the SCSI ports on the back of the MS-3020 to the external SCSI port on the host
PC with the enclosed SCSI LVD cable. Then, plug a terminator into another SCSI port on the back of
the MS-3020. If there is no SCSI port on the host PC, insert a SCSI adapter like the Adaptec AHA-
39160 or AHA-39320.
Daisy chain of MS-3020
Use SCSI LVD cables to connect two or more MS-3020, and add a terminator to the last MS-3020. See
figure 2-9 and refer to 2.2 for installing more MS-3020.
Host External
SCSI Port
MS-3020 SCSI Ports
Terminator
Figure 2-9
