5. Turn the ridged locking nut so the screw engages with the port cable
connector nut. Be careful to not over-tighten.
6. Rotate the combination wheels to lock the device in place. (If it
doesn’t lock, repeat Steps 3 – 5.
Setting the Combination
1. With the ridged locking wheel
in the locked position, push
the cable in toward the lock
and hold the cable in this
position while turning the
combination wheels to the
desired code.
NOTE:
Be sure you record or
memorize the new code. If the
combination code is lost or
forgotten, you cannot reset
the lock.
removing the LoCk
1. Set the combination wheels to the preset code.
2. Loosen the ridged locking nut to remove the screw from the port
cable connector.
