Mangescale Mg41-NE, Instruction Manual

Page: 52 / 184

4-2
(E)
MG41-NE / MG42
4. Installation and Connections
4-2. Setting the ID Number
4-2-1. MG41 Main Unit
Th is does not need to be set. It is fi xed at 0.
4-2-2. MG42 Hub Unit
Note
• Set the ID number of the MG42 hub unit by assigning the smallest number starting from the unit
nearest to the MG41 main unit. (Setting range: 1 to 31)
• Be sure to set so that the ID numbers are not duplicated. If the same ID number is set twice or more
within the system, the system will not operate.
1
Open the DIP switch cover (side) of the MG42 hub unit.
2
Make the DIP switch settings.
Setting range : 1 to 31
Setting to 0 is prohibited.
8
7
6
5
4
3
2
1
ON
SW8 Not used
SW7 Not used
SW6 Bit 5
SW5 Bit 4
SW4 Bit 3
SW3 Bit 2
SW2 Bit 1
SW1 Bit 0
OFF = 0 ON = 1
3
Close the cover.