Mangescale Mg41-NE, Instruction Manual

Page: 47 / 184

(E)
2-1
MG41-NE / MG42
2. Features
High-speed Measurement of 100 Axes
• Measuring units for up to 100 axes can be connected.
• Magnescale Co., Ltd.’s dedicated communication system enables the acquisition and calculation of the
data for 100 axes within 10 ms.
• Th e current values, maximum values, minimum values, peak-to-peak values, and comparator judgment
results for each axis can be acquired (using high-speed calculation processing by our dedicated ICs).
• Connectable with our measuring units DK800A, DK800B, DK10, DK25, DK50, DK100, DK110, DK155,
and DK205.
Support for Control Devices and FA Systems
• Can be installed on DIN rails
• Compact size for incorporation inside an electrical parts panel
• External power supply: DC +12 to +24 V
Combinations of Comparator Settings
• Comparator setting values can be made for each of the 100 axes.
• 32 individual comparator settings can be combined and used as axis groups.
16 groups of 2 settings
8 groups of 4 settings
4 groups of 8 settings
2 groups of 16 settings
Pause Functions
Th e latch function or pause function can be used as a hold function.
When the pause function is used, updating of the peak value can be stopped temporarily during
discontinuous measurement and measurement of multiple components for enabling the continuation of
measurement with the value in a held state.
Latch function : Values are held temporarily.
Pause function : Updating of peak values is stopped temporarily.