airflo (battery version)
8
ME0082 issue 1
Cleaning
Unplug the Airflo from the battery charger.
Clean the external surfaces using a damp cloth
and allow to dry thoroughly before reconnecting
to the battery charger. Do not allow moisture to
enter any part of the compressor.
Do not use solvent-based products.
Storage
When not in use, store in a dry place together
with these instructions. To maintain the batteries,
when being stored for long periods, put the
Airflo on charge overnight every 6 months.
Maintenance - fig.
11
At approximately 12 month intervals, inspect the
air filter located in the base of the Airflo (
A
), and if
necessary, fit a new filter (a kit of replacement filters
is available through your supplier - part number:
CA0233).
Battery replacement:
Turn the Airflo upside down and remove the four
screws (
B
) followed by the two battery supports
and rubber spacers (
C
). Turn the Airflo the right
way up to remove the batteries.
Fit the replacement batteries so that their
contacts are towards the center line of the
battery compartment.
NOTE:
Be careful not
to displace the battery compartment terminals
when changing the batteries.
IMPORTANT: Always replace both batteries and
use the same type.
The Airflo contains no other serviceable parts. If a
fault should develop, please contact your supplier
for further advice.
For details of Mangar International’s full
range of Customer Services please contact:
or contact your
local supplier.
•
•
•
•
•
B
A
C
11